WEITAI WL20 Series hydraulic helical actuators offer a cost-effective solution in countless industries. Five standard sizes with torque output from 500Nm up to 4200Nm at 21Mpa. The WL20 series hydraulic rotary actuator provides rotation 180 degree with foot mounting type. The typical application of WL20 Series is boom lift, bucket lift, elevating work platform, truck crane, marine,etc.
| Rotation | 180° |
| Output Mode | Front Flange, double flanges |
| Mounting | Foot |
| Drive Torque Nm@21Mpa | 4200 |
| Holding Torque Nm@21Mpa | 10500 |
| Max Straddle Moment Capacity Nm | 31600 |
| Max Cantilever Moment Capacity Nm | 15800 |
| Radial Capacity Kg | 9530 |
| Axial Capacity Kg | 1770 |
| Displacement 180° cc | 1070 |
| Weight 180° Kg | 77 |
| D1 Mounting Flange Dia mm |
196 |
| D2 Housing Dia mm |
191 |
| F1 Mounting Hole Of Shaft Flange mm |
M20×2.5 |
| F2 Qty of Shaft Flange Mounting Holes |
10 |
| F3 Bolt Circle Dia of Shaft Flange mm |
121 |
| F4 Clearnace Hole For Shaft Through Bolt Dia mm |
- |
| F5 Mounting Holes Of Housing Foot |
M30 |
| F6 Shaft Center Hole mm |
1 1/4-7 |
| F7 Mounting Hole Of Endcap Flange mm |
M16×2 |
| F8 Qty of Endcap Flange Mounting Hole |
10 |
| F9 Bolt Circle Diameter of Endcap Flange |
121 |
| H1 Height Without Counterbalance Valve mm |
218 |
| H2 Height To Centerline mm |
121 |
| H3 Foot Height mm |
70 |
| H4 Overall Height mm |
245 |
| L1 Overall Length mm |
337 |
| L2 Length Without Rotating Flange mm |
314 |
| L3 Shaft Flange To Counterbalance Valve mm |
49 |
| L4 Mounting Length mm |
216 |
| L5 Shaft Flange To Mounting Hole mm |
60.5 |
| W1 Mounting Width mm |
267 |
| W2 Overall Width mm |
330 |
| P1, P2 Port | ISO-1179-1/BSPP ‘G’ series, size 1/8 ~1/4. See drawing for details. |
| V1, V2 Port | ISO-11926/SAE series, size 7/16. See drawing for details. |
| *Specification charts are for general reference only, please consult drawing for actual values and tolerances. | |